• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Replacement UPVC Door Handles

If you're replacing the handles or adding a little extra security, you'll choose the perfect handle for your door. Upvc handles are simple to fit and comply with the required 92mm centres for multipoint locks.

The backplate fixing centre and the keyhole/lever dimensions are the most important measurements. Compare these measurements with your current marks before making a purchase.

Lever/Pad

Lever pad handles consist of a lever on one side, and a paddle-shaped handle on the other. These are designed for use with key wind locks. However they can be affixed to multipoint split spindle door locks.

Once you have selected the correct handle for the doors, the finishes will be displayed in the drop-down list. Certain styles of handles are not available in all finishes. It is recommended to check the technical drawing and dimensions for the item you are looking to ensure that you get the right fit and size.

It is important that when choosing a new set upvc lever pad handles, they match the PZ (distance from the handle spindle to the center of the hole of the cylinder) of your multipoint door locks. This is because these are required to be aligned for the doors to stay locked, no matter if you're looking at them from the inside or outside. Our handles are designed to fit a wide range of standard cylinders, however it is always worth double-checking before purchasing.

You'll need to take off your existing handles and dismantle the lock case if upgrading to dual spindle levers for your handle since this will require an additional split inline cylinder. You can purchase these separately. We have included a technical illustration in the images of each product.

Once you have removed the screws that hold your existing door handle it is an ideal idea to loosen them, and then inspect the mechanism to see how it's performing. It is possible that you will need to loosen the screws further when they aren't tight. Then you can take off the spindle and handle and put in your new upvc door handle. It is important to ensure that the handle is in the right position prior to screwing it into place. You can do this by placing your finger between the door frame, and the handle to ensure that it's in the right position.

Lever/Lever

Lever door handles operate a multi point lock using a Euro Cylinder and are found on the majority of upvc double glazing door handles doors, aluminium doors, and some wooden doors. They come in two forms, having an interior lever and a paddle on the outside. Sprung - These have a spring cassette fitted inside the backplate to move the handle lever to a horizontal position. Non-sprung - these do not have a spring mechanism and will require manual pulled to raise the handle lever back to its horizontal position.

To fix a door handle that is sagging, you will need to locate the detent access hole or pin, which is typically an elongated or rectangular shape hole or protruding pin located on one side of the handle base plate. Once you have located the hole for accessing the detent or pin, you can take it out using the help of a screwdriver.

When the handle is in a horizontal orientation, you can put the screws back in place and tighten them so that the handle stays fixed to the base plate. It is also advisable to apply a threadlocking adhesive solution to the threads of the screw to increase the grip and prevent them from loosening over time.

There are a myriad of reasons why door handles of levers droop. The most common reason is that the fixings have been too tightened and are putting stress on the bearings of the lever, which causes it to become a bind on the door's face. It could also be because the levers aren't being operated at a straight angle and this is causing the latch mechanism preventing it from fully springing back into service.

A common cause of a spring lever not operating properly is that the spring is not being in the right position on the backplate. To determine whether the handle is back to its horizontal position, simply turn it.

It is crucial to repair any loose door handles immediately. This could cause excessive wear on the screws, and the handle might fall off the base plate. It is recommended to tighten all screws that are loose regularly in order to stop them from loosening.

Lever/Snib

These handles made of upvc door handles are called 'Snib handle sets' and feature an snib lock button located at the top of the lever. If you do not have a dummy locking device you can use this to lock the door. They are typically fitted with a Fullex 68PZ (that's 68mm between the spindle's center and lever or the lock centre) door lock. We also have a selection of door handles with 68PZ from manufacturers such as Ferco and Fab & Fix.

You can update your home by changing your door handles, whether you are replacing your existing handles or installing new ones on doors that you've constructed. There are a variety of door handles made of upvc, including traditional lever on backplate, straight or curving short latches and dummy knob handles for multi-point locks, which are perfect for French doors.

Rose external door handles handles are oval or circular versions of lever on backplate handles. These types of door handles come with the knob or lever on a backplate, which sits behind the knob or lever and is sometimes called a rosette. However, certain backplates can be removed to allow for concealed fixing.

There are a wide range of chrome and coloured finishes available for these handles that complement your door and other hardware, like bolts, knobs and hinges. Some handles come with grub screws that help firmly attach the knob or lever to the spindle. Other handles are supplied with bathroom spindles that can be used to control bathroom locks and include a thumbturn turn and release mechanism, ideal to use on doors for bathrooms.

Mortise

If your front door's uPVC handle is stuck in the open position, the cause is most likely to be related to the tubular latch. There are a few things that can cause this, one of which is an unlubricated latch plate on the latch plate. It is possible to solve this problem by opening the door, spraying lubricant on the lock and handle. It could also be that the latch is loose from the backplate. This can be a bit more of a problem and will require a specialist to fix.

A multipoint door handle system is the ideal solution to solve the issue of a sticking door handle. The handles are positioned through the faceplate, and are operated with either a thumb turn or key knob that triggers the cam that locks the deadbolt. The handles are available in different sizes to fit various types of uPVC doors and are available in various attractive finishes that are compatible with existing hardware. The handles can be bought via the internet or from an authorized locksmith in your area. They are easy to install with clear instructions.

You'll need to know your cylinder's PZ size in order to select the right replacement handle set. This is the distance from the edge of the inner frame of the door to the central point of the hole for the window handle replacement in millimetres. You should also determine if the door is hook-style locks or a mortise style lock. Once you know these measurements, the most efficient method to locate the correct handles is to use the filter by brand option on the website. This will narrow down the options, and you will then choose the appropriate size from there.

A typical set of handles includes the handle unit with two screws of various lengths, drill guides and instructions for installation. The smart models, like the Igloohome Smart Mortise 2+, include an entire mortice lock that has built-in keypad. These are more complex models that are best suited to professionals or highly skilled DIYers. Some handle sets have a range of other accessories, like weather strips, that can be used to enhance the look of the door.