• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

In Wall Fireplace - How to Choose the Right Height and Depth for Your Fireplace

A built-in fireplace offers a sleek, polished look without having to pay for a mantle. It is one of the easiest electric fireplaces to set up.

There are some things to think about prior to purchasing an in-wall fireplace. Follow these suggestions to get the most of your purchase.

Height

It may appear to be a simple question however, determining the height of your fireplace is one of the biggest decisions you will make. The height of your fireplace will affect everything from how it fits in a room to its visibility. A fireplace that is too high can look unnatural and detract from the beauty of the piece. A fireplace that is too low will be lost within the wall space.

Luckily electric fireplaces shop are able enough to be positioned at a variety of heights. The majority of people place their fireplaces in a seated position at eye level. This requires a height between 40-42 inches. Others mount their fireplaces underneath their TVs, which can be visually appealing.

However, the height of your fireplace will be determined by certain factors, such as the dimensions of the room as well as the length of the wall you'd like to put it. The larger the space is, the bigger it will be. This could mean that you are capable of fitting a larger fireplace into it. The same goes for the length of the wall, as a wall with a greater length can accommodate a fireplace that is larger.

The way you intend to utilize your fireplace is an important aspect. If you plan to use it for decorative purposes, a smaller level will work better. However, if you plan to heat your home with it, you'll need make sure that the fireplace is tall enough to satisfy local codes and safety standards.

It is essential to choose the appropriate size for your fireplace to ensure that it can fit into your decor and is easy to clean or fill. It is always a good idea to ask a professional fireplace suites installation expert to assist you if are unsure of the size you should pick. They can advise on the best height for your fireplace, according to their experience and the design of your home's design.

Depth

It is important to know the depth of a fireplace, especially if you are planning to place it in an recessed position. If you're planning to cut into the wall, make sure that you have enough space to accommodate your fireplace's inner design (the area for the smoke shelf that is above the firebox and the flue that extends upwards from the roof). You should also think about the space you have available for the surround and whether you would like a fireplace mantle.

Many of the newer electric fireplaces come with an interior depth that is almost concealed, creating a "built-in" look. The Panorama Bi-Deep series is a fantastic illustration of this kind of wall-mounted electric fireplace. The model has an 5.8-inch depth that allows the viewer to see the flames and the ember bed and not the frame of the fireplace. It also comes with a choice of media packages including natural looking driftwood logs, white pebbles, or crystals made of clear glass that reflect the flames and add luster to the ember bed.

Wall-mounted gas fireplaces are also available in deep and shallow models. When deciding on the depth of your fireplace, it is important to remember that these fireplaces work as a heat source that can be used for supplemental purposes and must be properly vented by an experienced professional. When determining the depth of a gas fireplace, you need to think about the length of the vent pipe and the size of the chimney.

No matter if you opt for a surface mount or recess-mounted installation, it is essential to follow the manufacturer's instructions carefully when mounting your fireplace. In most cases, a professional installer is advised. It is recommended to have an additional person available when installing gas fireplaces.

Adding an in-wall fireplace to your home can be an great way to boost its value and also add ambiance to your living spaces. It also can reduce the cost of heating. Furthermore, it's a great option if you cannot install an old-fashioned fireplace into your home due to space limitations or due to the location of your existing chimney.

Surface Mount

If you're unable, or prefer not to cut through your wall or build out a space to accommodate an electric fireplace, a surface mount provides a sleek and built-in appearance. Certain models, such as the Allusion line of electric fireplaces shop, can be positioned partially recessed into a wall, without compromising heat output.

To start the installation process, identify the area where you want your fireplace to be placed and make a mark with a pencil on the wall where the bracket will be put. Utilize a stud locater to locate the studs within that area and make sure every mounting bracket is directly in the front of one or more studs for stability. If a stud is not reached or is not suitable for your fireplace, you could make use of drywall anchors for support.

Once you've identified the location of the mounting brackets on the wall using a power drill, you can use it to install them, making sure they are properly aligned with the studs. If you can, secure each bracket to a stud for security and strength, but you could also use plastic anchors in the event of need. Once the mounting brackets have been installed then lift the fireplace up and hang it from the bracket. After it's secured, you can check the position of your fireplace to ensure that it is straight and not crooked in the opening.

Before continuing with the installation, connect your fireplace and ensure that all the features are functioning correctly - turn on the flame and light up the flames, play around with the heat, ember bed lights and so on. When you are satisfied with the results, it's time to put in the floating mantel.

Based on the model of your fireplace It is possible to connect the wire connection to the appliance connector at the lower part of the mantel or if it has hooks or slots connected to slots on the brackets for mounting. Once you've done that then, refer to the owner's manual for specific instructions on removing the front glass panel and inserting it into the opening.

After you've removed the front panel of your fireplace and inserted it in its opening, follow your manual's specifications to finish the install by replacing the glass front and adjusting the height if necessary. If your fireplace is equipped with ember bed media, spread it over the top of the grate for an organic appearance, then secure it with the included screws.

Plug-In

Contrary to traditional wood-burning fireplaces electric fireplaces wood don't require chimneys or vents. They're plugged into an outlet that is standard, providing supplemental heating for rooms that are up 400 square feet in size. They also come with a variety of temperature and flame settings so you can customize your ambiance. Some models come with LED lighting effects that highlight the ember bed and fire. Some models feature an upper grille that hides the manual controls, but can be easily opened to reveal pushbuttons.

Electric fireplaces with plug-ins can be hung directly on walls or built into the wall to create an aesthetically pleasing appearance. These fireplaces are usually easier to install than mantel fireplaces. Some models have a pedestal that permit you to place the fireplace on flat surfaces like a buffet or dresser. A remote control along with mounting hardware and a log set are included. Electric fireplaces are able to include both heat and flame options that can be turned off to create a year-round ambience.

Some models have privacy glass that can be adjusted instantly, from being fully transparent to partially transparent. This option makes these models popular for walls that separate common entertainment spaces like living and dining areas. These models are ideal in bedrooms, where a fireplace is a cost-effective option to warm up a space and keep it private.

Plug-in electric fire places don't require a hardwire however they must be installed in a wall capable of supporting their weight. Certain models come with an accessory kit to make this process more simple with a pre-wired power cord as well as a special mounting bracket. This kit is suitable for the installation of drywall or concrete.

When deciding where to put your wall-mounted electric tabletop fireplace, ensure it's close to an electrical outlet. Depending on the model, plug-in electric fireplaces can be plugged into outlets that are connected to the same circuit, or a dedicated one for your electric fireplace. It is best to choose a different circuit so that no other appliances in your home run on the same voltage. This could trigger your breaker.